Margo Rubber Products
Automotive assembly using moulded rubber bushes, seals and grommets
AURANGABAD · WALUJ · SHENDRA · BIDKIN

Automotive Rubber Parts for Aurangabad Suppliers

Aurangabad, now Chhatrapati Sambhajinagar, is one of Maharashtra's largest two-wheeler, three-wheeler and component clusters. We mould its rubber parts in Nashik, about 190 km by road, to drawing and in volume.

  • About 190 km by road
  • Two- and three-wheeler
  • Quote in 48 hours

Margo Rubber Products supplies automotive rubber parts to suppliers in Aurangabad (Chhatrapati Sambhajinagar), Waluj, Shendra and Bidkin from its plant in Vilholi, Nashik, about 190 km by road. Oil seals, rubber bushes, O-rings, grommets, boots and pads are moulded to drawing, with a minimum run of 10,000 pieces per part number and installed capacity of 5 million parts a month.

SUPPLY INTO AURANGABAD

One road from Nashik.

Nashik and Aurangabad are connected by road through Vaijapur, so samples and approvals do not wait on courier routes.

Road distance

About 190 km from Vilholi, Nashik to Aurangabad, with Waluj on the near side of the city.

Two-wheeler compounds

NBR and FKM fork and crankcase seals, natural rubber and AEM bushes, EPDM boots and grommets.

Volume and spare capacity

Installed capacity is 5 million parts a month against about 1.5 million in current production. The minimum run is 10,000 pieces per part number, per compound.

Checked through the run

Every mixed batch is checked, every run at set-up and every half hour, and every despatch lot for dimensions and hardness. Target rejection is under 1%; on-time delivery is over 99%.

AURANGABAD'S AUTOMOTIVE AREAS

Where our parts go around Aurangabad.

Waluj MIDC

Two-wheeler, three-wheeler and component suppliers: oil seals, O-rings and bushes.

Shendra and Bidkin (AURIC)

New assembly and component plants: grommets, pads, stoppers and profiles.

Chikalthana

Component and engineering suppliers: bushes, boots and seals.

Tier 2 moulders and fabricators

Rubber content for plastic, metal and electrical sub-assemblies.

FREQUENTLY ASKED QUESTIONS

Questions from automotive buyers.

Do you supply automotive rubber parts to Aurangabad and Waluj?

Yes. We mould in Vilholi, Nashik, about 190 km by road from Aurangabad (Chhatrapati Sambhajinagar), and despatch to suppliers in Waluj, Shendra, Bidkin and Chikalthana. Automotive customers include Mahindra & Mahindra, Tata and Hyundai, alongside component suppliers such as Satish Injecto-Plast, Abhijeet Plastics (India) and Ukay Metal Industries.

Can you supply two-wheeler oil seals in volume?

Yes. Fork, crankcase and gear-shift seals are moulded in NBR or FKM to DIN 3760, ISO 6194 or your drawing. The minimum run is 10,000 pieces per part number, per compound, and installed capacity is 5 million parts a month.

How quickly can an Aurangabad supplier get a quotation?

Within 48 hours of the drawing. Production takes three to four weeks from drawing approval, and every despatch lot is checked for dimensions and hardness before it leaves Nashik.

GET A QUOTE

Aurangabad supplier? Send the drawing.

Drawing or sample, compound if specified, annual volume and your plant location. We reply within 48 hours.