
Automotive Rubber Parts for Pune & Chakan Suppliers
Pune's automotive belt, from Pimpri-Chinchwad and Bhosari to Chakan, Talegaon and Ranjangaon, buys rubber parts in the millions. We mould them in Nashik, about 210 km by road, to your drawing and in your volumes.
- About 210 km by road
- Passenger, two-wheeler, CV
- Quote in 48 hours
Margo Rubber Products supplies automotive rubber parts to suppliers in Pune, Chakan, Talegaon and Ranjangaon from its plant in Vilholi, Nashik, about 210 km by road. Rubber bushes, oil seals, O-rings, grommets, pads and profiles are moulded to drawing, with a minimum run of 10,000 pieces per part number and installed capacity of 5 million parts a month. Quotation in 48 hours.
WHAT PUNE SUPPLIERS BUY FROM US
Rubber for passenger cars, two-wheelers and trucks.
Pune builds all three, and the Tier 1 and Tier 2 suppliers around Chakan and Pimpri-Chinchwad need rubber for each.

01
Rubber bushes & silent blocks
Silent-block, insulation, linkage and cushion bushes, bore and OD to drawing.
View product
02
Rubber oil seals
Shaft seals in DIN 3760 and ISO 6194 sizes, single and double lip.
View product
03
O-rings
AS568, ISO 3601, JIS B2401 and DIN 3771 sizes, or cut to your drawing.
View product
04
Wiring harness grommets
Open, blind, multi-hole and oval grommets for harness and firewall pass-throughs.
View product
05
Pads, stoppers & caps
Support pads, glove-box stoppers, filler caps and shroud flaps to drawing.
View product
06
Dust boots & gaiters
Boots for linkages, steering and driveshafts, Ø10 to Ø150 mm.
View product
SUPPLY INTO PUNE
Close enough to visit, large enough to supply.
Nashik and Pune sit on the same road network, so samples, first-article approvals and plant visits do not need a flight.
Road distance
About 210 km from Vilholi, Nashik to Pune, with Chakan and Talegaon on the way in. Samples and approvals move by road.
Plant visits
Pune buyers can audit the moulding, mixing and tool room in Nashik in a day trip.
Volume and spare capacity
Installed capacity is 5 million parts a month against about 1.5 million in current production. The minimum run is 10,000 pieces per part number, per compound.
Checked through the run
Every mixed batch is checked, every run at set-up and every half hour, and every despatch lot for dimensions and hardness. Target rejection is under 1%; on-time delivery is over 99%.
PUNE'S AUTOMOTIVE AREAS
Where our parts go in the Pune belt.
Chakan and Talegaon
Passenger-vehicle and component plants: bushes, O-rings, grommets and body pads.
Pimpri-Chinchwad and Bhosari
Commercial-vehicle and component suppliers: oil seals, bushes and boots.
Ranjangaon
Assembly and component plants: grommets, stoppers and profiles.
Two-wheeler suppliers
Fork, crankcase and swing-arm seals and bushes in high-volume runs.
FREQUENTLY ASKED QUESTIONS
Questions from automotive buyers.
Do you supply automotive rubber parts to Pune and Chakan?
Yes. We mould in Vilholi, Nashik, about 210 km by road from Pune, and despatch to suppliers in Pune, Chakan, Talegaon, Ranjangaon and Pimpri-Chinchwad. Automotive customers include Mahindra & Mahindra, Tata and Hyundai, alongside component suppliers such as Satish Injecto-Plast, Abhijeet Plastics (India) and Ukay Metal Industries.
Is there a rubber bush manufacturer near Pune for high volumes?
Our Nashik plant moulds rubber bushes, silent blocks and cushion bushes in runs from 10,000 pieces per part number, with installed capacity of 5 million parts a month. It is a road trip from Pune, close enough for a plant visit and sample approval in a day.
How fast can a Pune supplier get a quotation and samples?
Quotation within 48 hours of the drawing. A part with an existing tool can be sampled quickly; a new tool is cut in our own tool room. Production takes three to four weeks from drawing approval.
MORE FOR AUTOMOTIVE BUYERS
Automotive rubber parts by part and location
Pune supplier? Send the drawing.
Drawing or sample, compound if specified, annual volume and your plant location. We reply within 48 hours and can arrange a visit to the Nashik plant.
